Single versus poly-crystalline layered oxide cathode materials for solid-state battery applications - a short review article

The recent developments in the application of single-crystalline (SC) cathode materials in solid-state batteries are discussed in this mini-review. The characteristics of SC and poly-crystalline (PC) cathode materials are explored, with emphasis on the kinetic and mechanical properties. The critical factors influencing their performance in liquid electrolyte and solid-state battery cells are investigated. Finally, the advantages and disadvantages of both morphologies are discussed and considerations to ensure a fair comparison between SC and PC cathodes in different systems are raised.     

Fabrication and characteristics of self‐aggregation nanoparticles used for conformance control treatment

In order to alleviate the contradiction between injectability of the profile control agent and its profile control performance, a novel core‐shell heterogeneous structure colloidal particles (CSA) were synthesized, and the mechanism of self‐aggregation plugging was proposed. Cross‐linking inside the nanoparticles and chain‐growth polymerization via capturing acrylamide in the aqueous phase result in the formation of core‐shell heterogeneous structures as proved by TEM observation and XPS analysis. Moreover, CSA nanoparticles exhibit good hydrophilic properties, outstanding thermal stability and limited expansion capacity. Effects of different metal cations and surface group on the self‐aggregation time of CSA nanoparticles were systematically studied. Results showed that divalent cations contributed to more significant aggregation of CSA nanoparticles in comparison to monovalent cations. The increasing cations concentration and valency decreased the thickness of electric double layer, which lead to a decrease in the zeta potential. Core flooding test shows that the injection of nanoparticles which diameter is much smaller that of pore‐throats into the target reservoir can not only successfully enter the depth of porous media, but also effectively block the high permeability areas by the formation of self‐aggregation particle clusters. This study provides a new method for the equilibrium between nanoparticles injectivity and in‐depth profile control of nanoparticles.     

Coacervates as models of membraneless organelles

Coacervates are condensed liquid-like droplets, usually formed with oppositely charged polymeric molecules. They have been studied extensively in colloid and interface science for their remarkable material properties. The liquid–liquid phase separation underlying coacervate formation also plays an important role in the formation of various membraneless organelles (MLOs) that are found in many living cells. Therefore, there is an increasing interest to use well-characterized coacervates as in vitro models that mimic specific aspects of MLOs. Here, we review five aspects – physical and chemical properties, hierarchical organization, uptake selectivity, formation dynamics, and maturation – that are of particular interest and discuss how useful coacervates are to better understand these aspects of MLOs.     

Changes in the physical properties of low bandgap polymer after interaction with ionic liquids

Over the past few years, polymers shown comprehensive utilization in optical devices, solar cells, sensors, and other such devices. However, the efficiency of these devices remains a problem. We have synthesized new thiophene based, lowband gap polymer, poly(2-heptadecyl-4-vinylthieno[3,4-d] [1,3] selenazole) (PHVTS) and investigated the interactions between the PHVTS and ionic liquids (ILs), in this study. We have used imidazolium- and ammonium-family ILs, and studied the interactions using various spectroscopic techniques such UV–visible, FTIR, and confocal Raman spectroscopies. Additionally, we studied surface morphology of the polymer-IL film. Spectroscopic studies show that both families of ILs can interact with the newly synthesized polymer poly(2-heptadecyl-4-vinylthieno[3,4-d] [1,3] selenazole). However, the imidazolium-family Ionic Liquid-polymer (IL-polymer) mixture films show higher conductivities than ammonium-family IL–polymer mixture films.     

丹荷颗粒治疗高脂血症质量标志物发现研究

为寻找丹荷颗粒治疗高脂血症的质量标志物,该研究基于丹荷颗粒体内成分分析结果,采用Cytoscape软件构建高脂血症-共有靶点-丹荷颗粒体内成分作用网络,利用DAVID及String数据库分别对共有靶点进行生物过程、通路富集及网络拓扑分析,明确丹荷颗粒降脂作用关键靶点及成分,再建立油酸诱导的HepG2细胞脂质堆积模型验证关键成分的降脂药效,最后结合相关成分在制剂中的含量、稳定性、特征性综合确定质量标志物。结果发现,丹荷颗粒体内成分作用于CES1、ADORA2A、ADORA1、APOB、LDLR、PPARA、PPARG、INSR、ESR2、ESR1共10个高脂血症疾病靶点,主要参与脂质代谢过程以及PPAR、cAMP信号通路,其中LDLR、PPARA、PPARG可能是关键靶点,而网络中与关键靶点直接作用的成分为白藜芦醇、柚皮素。白藜芦醇和柚皮素均可降低油酸诱导的HepG2细胞内脂滴数量,改善细胞脂质堆积严重程度,并显著降低细胞内甘油三酯含量,可能为关键成分;鉴于入体成分白藜芦醇和柚皮素来源于制剂中虎杖苷及柚皮苷,且制剂中虎杖苷及柚皮苷特征明显、含量丰富、稳定,故虎杖苷及柚皮苷可作为丹荷颗粒治疗高脂血症的质量标志物。该研究为丹荷颗粒质量标准的建立提供了合理的候选质控指标。     

Tailoring of carboxyl‐decorated magnetic latex particles using seeded emulsion polymerization

In this research, submicron and carboxyl‐functionalized magnetic latex particles were elaborated by using seeded emulsion polymerization technique in presence of oil‐in‐water (o/w) magnetic emulsion as seed. The polymerization conditions were optimized in order to get well‐defined latex particles with magnetic core and polymer shell bearing carboxylic (–COOH) functionality. Starting from (o/w) magnetic emulsion as seed, synthesis process was performed by copolymerization of styrene (St) monomer with the cross‐linker divinylbenzene (DVB) in presence of 4,4′‐azobis(4‐cyanopentanoic acid) (ACPA) as a carboxyl‐bearing initiator. The prepared magnetic latex particles were first characterized in terms of particle size, chemical composition, morphology, magnetic properties, magnetic content, and colloidal stability using various techniques, e.g. particle size analyzer using dynamic light scattering (DLS) technique, Fourier transform infrared, transmission electron microscopy, vibrating sample magnetometer, thermogravimetric analysis, and zeta potential measurements as a function of pH of the dispersion media, respectively. The prepared magnetic latex particles were then used as second seed for further functionalization with methacrylic acid (MAA) in order to enhance carboxylic groups on the magnetic particle's surface. The results showed that final magnetic latex particles possessed spherical morphology with core‐shell structure and enriched carboxylic acid functionality. More importantly, they exhibited superparamagnetism with high magnetic content (58.42 wt%) and high colloidal stability, which considered as the main requirements for their application in the biomedical diagnostic domains. Copyright © 2017 John Wiley & Sons, Ltd.     

Self-assembly morphology and packing structures depend on the ‘head’ of organic cations anchored on polyoxometalate anions in hybrids

Two organic-polyoxometalates (organic-POMs) hybrids were constructed by fan-shaped 1-methyl-3-[3, 4, 5-tris(octadecyloxy) benzyl]imidazolium salts (labelled as I–Cl) and triethyl-[3, 4, 5-tris (octadecyloxy) benzyl] ammonium salts (labelled as Q–Cl) and Keggin anions [SiW₁₂O₄₀]^4? by electrostatic interaction. Self-assembled behaviours of two aggregates in organic solvent and solid state were investigated in detail by scanning electron microscopy, transmission electron microscopy and X-ray analysis. The mixed solution of chloroform–methanol or chloroform–acetone provided the stable environment for aggregates and aggregates showed a uniform micron size. X-ray analysis results showed that flower-like aggregates morphology of I₄[SiW₁₂O₄₀] based on imidazole ring as ‘head’ in organic cations was formed by the stacking of multilamellar discs and kept the lamellar structure in solid state. Bulk thorn spheres appeared in Q₄[SiW₁₂O₄₀] aggregates, which were formed by closely interspersed of lots flatted blocks with hexagonal structure characteristics in solid state. The comprehension for the self-assembly morphology and solid structure of organic-polyoxometalate hybrids would help us to use easily modified organic moiety and functional inorganic polyoxoanions as blocks to build novel and giant supramolecular architecture.